Resources

Cleaning guides

Short, practical guides written by the people who formulate the products.

The Ten-Minute Reset

A room-by-room sequence for keeping a home guest-ready without a deep clean.

  1. 1Clear surfaces before you spray — always.
  2. 2LuxClean All-In-One on counters, left 30 seconds before wiping.
  3. 3Crystal Lux Glass Sparkle on the one mirror people actually notice.
  4. 4Dust Away Lux Spray on wood, moving with the grain.

Caring for Natural Stone

Marble, quartz and granite need pH balance more than they need pressure.

  1. 1Never use acidic or citrus cleaners on unsealed stone.
  2. 2Mist LuxStone Care Polish and buff with a dry microfiber cloth.
  3. 3Blot spills immediately; wiping spreads pigment into the pores.
  4. 4Re-seal natural stone every 12–18 months.

Floors That Stay Beautiful

The most common floor damage comes from too much water, not too little cleaner.

  1. 1Vacuum or dry-mop before any wet cleaning.
  2. 2Mist LuxStep Floor Revive directly onto the mop head, not the floor.
  3. 3Work in three-foot sections toward the doorway.
  4. 4Let floors dry fully before replacing rugs.

Kitchen Grease, Solved

Dwell time does the work that scrubbing usually gets credit for.

  1. 1Apply PowerLux Pro Strength and wait a full 60 seconds.
  2. 2Use a non-abrasive pad on range hoods and backsplashes.
  3. 3Finish with LuxClean All-In-One to remove residue.
  4. 4Never combine with bleach-based products.

Looking for ingredient details? Read our product safety information.